+-


Alarm Monitoring

Alarm Monitoring

Members Online

69 Guests, 0 Users

Alarm Installer Search and Reviews




Myalarminstaller.com

Author Topic: Safewatch Pro 3000 keypad LCD blank.  (Read 1452 times)

JAX

  • Member
  • *
  • Posts: 1
  • Karma: +0/-0
  • I'm a llama!
    • View Profile
Safewatch Pro 3000 keypad LCD blank.
« on: February 23, 2005, 12:08:42 PM »
Keypad LCD was fine when I first powered my system up but I needed to reset to factory settings.  After I entered programming and hit *97, the code was accepted but now the keypad LCD is blank.   The button backlighting is still lit and panel still beeps when buttons are pushed but LCD display is blank.  When I repower the system, the heypad initializes with LCD display and armed/ready lights then beeps and armed/ready and LCD display are blank.  Again keypad still beeps when buttons are pushed and lights are on but nothing else...  Please help.

dave

  • Guest
Re:Safewatch Pro 3000 keypad LCD blank.
« Reply #1 on: February 23, 2005, 03:26:36 PM »
at the keypad, disconnect the positive wire, then reconnect, hold 1+3 and then keypad should display a number, it should be 16, if not you need to enter 16, then it should work for you.

Repairguy

  • Security Guru
  • ****
  • Posts: 675
  • Karma: +37/-0
    • View Profile
Re:Safewatch Pro 3000 keypad LCD blank.
« Reply #2 on: February 23, 2005, 08:40:28 PM »
Also, do you have more than 1 keypad?  If so, defaulting the panel would have turned off all but address 16 and you will need to go back in and turn them back on in programming.

 

Powered by EzPortal